|
Advanced Technical Services Ltd
|
|
Most major manufacturers of dental high-speed drills recommend that after lubrication that the hand piece be run to purge the excess lubricant out before sterilization. This is not often practical in a busy dental practice, there are various hand piece maintenance systems available that take care of the whole process but the expense of these may put it out of reach of many small dental practices, the simple purge station below enables the operator to purge the hand piece easily after lubrication ensuring that the maintenance and care recommendations from the manufacturer are followed, increasing the life of the high-speed hand piece.
With the modern sterilizers on the market increasing in complexity to ensure they comply with the most stringent standards has also made the units more susceptible to damage caused by hand piece lubricants, causing premature failures, by purging the hand piece before sterilization eliminates most of the harmful oils and cleaners.
Click here to see the Kavo Maintenance guide
Click here to see the W&H maintenance guide
High Speed Handpiece Purge Station with Hepa Filter
|
|
Handpiece adaptors available:
Midwest® Adapter
Star® Adapter
Kavo® Adapter
NSK, Kinetics, Healthco, Viper, Atech Adapter
Borden Adapter
Midwest XGT Adapter
Lares Adapter
W&H Adaptor
Hepa Filter
Phone:
+64 3 377 4793 Fax: +64 3 377 4794
Physical Address:
20 Brisbane Street, Sydenham, Christchurch New Zealand
Postal Address PO
Box 13740 Christchurch 8011 New Zealand
Email: sales@advancedtechnical.co.nz
Service,
Installation and Repair of all Dental Equipment
Dental
Chairs, Autoclaves, X-ray Equipment, Air compressors, Suction Systems